This tutorial applies to the Wavytalk Steamlift Pro Steam Thermal Brush.
The Steamlift Pro combines heat, ultra-fine steam and a thermal brush design to smooth, shape and add volume to dry hair. In this guide, we'll walk through how to fill the water tank, adjust the settings and create three different looks: a loose blowout, defined curls and soft loose curls.
Quick answer: Start with clean, dry and detangled hair. Fill the water tank with purified or distilled water, turn on the Steamlift Pro, choose a suitable temperature and steam setting, then work through your hair in manageable sections.
Table of Contents
- Before You Start
- How to Fill the Water Tank
- Controls and Settings
- Styling Tutorials
- Styling Tips and Common Mistakes
- Cleaning and Storage
- Frequently Asked Questions
Before You Start
A little preparation makes the Steamlift Pro easier to use and helps you get a smoother, more controlled finish.
-
Make sure your hair is dry. The Steamlift Pro is a styling tool, not a hair dryer, so do not use it on wet hair.
-
Detangle your hair first. Brush through knots before styling so the thermal brush can move smoothly from roots to ends.
-
Divide your hair into manageable sections. Smaller sections are generally easier to control, especially when creating curls.
-
Choose a comfortable temperature. If you're unsure which setting works for your hair, start lower and increase only as needed.
Alternatively, you can refer to the hair type and temperature reference chart provided by Wavytalk.
- Please bring heat-resistant gloves if necessary. Avoid touching the heated barrel or steam vents during use.
Important: It is recommended to use only purified or distilled water in the Steamlift Pro water tank. Using tap water or mineral water may cause mineral buildup inside the steam system.
How to Fill the Steamlift Pro Water Tank
- Make sure the tool is unplugged before filling the water tank.
- Push the water-tank release switch down and remove the tank from the handle.
- Open the water tank.
- Use the included water dropper to fill it with purified or distilled water.
- Close the tank securely.
- Reattach the tank to the handle until it snaps firmly into place.
Steamlift Pro Controls and Settings
Before styling, take a moment to get familiar with the controls. The display lets you check the current temperature and steam status while you work.
- Plug in the Steamlift Pro.
- Press and hold the power button for approximately 1.5 seconds until the tool turns on.
- Use the temperature button to select your preferred heat setting.
- Adjust the steam setting as needed for your styling routine.
- After about 5 seconds without adjustment, the temperature and steam settings automatically lock.
- Push the switch down to unlock the settings when you need to make another adjustment.
Good to know: The Steamlift Pro uses ultra-fine steam, so you may not always see a large visible cloud of steam while styling. That does not necessarily mean the steam function is not working.
How to Style Hair With the Steamlift Pro
The same steam thermal brush can create different finishes depending on how you position, rotate and release the brush. Here are three techniques shown in the Steamlift Pro tutorial.
1. How to Create a Loose Blowout
This technique is designed for a smooth, polished blowout with soft movement through the lengths and ends.
- Start with dry, fully detangled hair.
- Take a manageable section and run the steam thermal brush through it to smooth the hair.
- Place the section around the barrel with the steam thermal brush facing the hair.
- Keep gentle tension on the section as you begin moving the brush downward.
- Glide and slowly twist the brush through the lengths.
- Continue the motion through the ends, then gently release the section.
- Repeat on the remaining sections until the style is complete.
Tip: Keep the movement smooth rather than stopping repeatedly through the mid-lengths. This helps create a softer, more even blowout shape.
2. How to Create Defined Curls
For a more defined curl, keep the hair wrapped around the barrel for a short period before releasing it.
- Detangle your hair and divide it into upper and lower sections.
- Divide each section again into smaller, manageable pieces.
- Wrap one section around the barrel with the steam thermal brush facing the hair.
- Twist the brush toward your head until the section is wrapped securely around the barrel.
- Hold the section in position for approximately 6–8 seconds.
- Unroll the brush once, gently hold the styled section, then unwind the hair from the brush without pulling the curl straight.
- Repeat throughout the remaining sections.
- Allow the curls to cool before separating or brushing them out.
Tip: If you want a softer finish, let the curls cool first and then gently separate them with your fingers.
3. How to Create Soft Loose Curls
If you want movement mainly through the ends rather than a fully wrapped curl, use a simpler glide-and-twist technique.
- Take a dry, detangled section of hair.
- Place the brush underneath the section and slowly glide downward.
- When you reach the ends, rotate the brush so the ends wrap around the barrel.
- Hold the wrapped ends for approximately 6–8 seconds.
- Gently release the hair without pulling the new shape straight.
- Repeat on the remaining sections.
Styling Tips and Common Mistakes
-
❌Using the Steamlift Pro on Wet Hair
The Steamlift Pro is designed for dry hair. If your hair has just been washed, dry it completely before beginning your styling routine. -
❌Taking Sections That Are Too Large
Large sections are more difficult to wrap and control. Use smaller sections when creating defined curls or when your hair is thick or dense. -
❌Using Tap Water
Use purified or distilled water only. Minerals in tap or mineral water can build up inside the steam system over time. -
❌Pulling the Curl Straight During Release
When releasing a curl, gently unwind the hair instead of pulling the brush straight through it. This helps preserve the shape you just created. -
❌Touching the Style Before It Cools
Give curls and shaped ends a moment to cool before brushing or separating them. Handling them immediately can loosen the finished shape.
How to Clean and Store the Steamlift Pro
Regular cleaning helps keep hair, styling-product residue and buildup away from the brush teeth and barrel.
- Turn the Steamlift Pro off and unplug it.
-
Allow the tool to cool completely.
- Use the included cleaning brush to remove hair caught between the teeth.
- Use a folded damp cloth or alcohol wipe to gently remove residue from between the teeth and around the exterior of the tool.
- Allow the tool to dry completely before storing it.
- Do not immerse the Steamlift Pro in water.
Frequently Asked Questions
Can I use the Wavytalk Steamlift Pro on wet hair?
No. The Steamlift Pro is designed to smooth, curl and create blowouts on dry hair. It does not have a hair-drying function.
Can I use tap water in the Steamlift Pro?
No. It is recommended to use only purified or distilled water. Tap water and mineral water may leave mineral deposits in the steam system.
Why can't I see steam coming from my Steamlift Pro?
The Steamlift Pro produces ultra-fine steam, which can be much less visible than traditional steam. If you're unsure whether steam is being released, you can briefly point the brush toward a mirror and check for the fine steam against the surface.
Why can't I change the temperature or steam setting?
The Steamlift Pro automatically locks its temperature and steam settings after about five seconds of inactivity. Push the switch down to unlock the controls before making another adjustment.
How long should I hold the brush when creating curls?
In the Steamlift Pro tutorial, the brush is held in position for approximately 6–8 seconds when creating defined curls or shaping the ends. Adjust your technique based on your hair and the result you want.
What temperature should I use?
Select a temperature suitable for your hair type and condition. If you're unsure, start with a lower setting and gradually increase only if additional heat is needed.
Can I travel internationally with the Steamlift Pro?
The Steamlift Pro supports 100–240V worldwide voltage. You may still need the appropriate plug adapter for your destination.
Ready to Style With Steamlift Pro?
From polished blowouts to defined curls and softly shaped ends, the technique comes down to how you position and rotate the brush.
Shop the Wavytalk Steamlift Pro Steam Thermal Brush
For more product setup, styling and care tutorials, visit the Wavytalk Help Center.
WAVYTALK-LIMITED-TIME OFFER
Daily Special Deals: Up to 48% Off Sitewide
Ready to upgrade your routine? Shop Wavytalks's best-selling hair and beauty tools during Daily Special Deals and enjoy up to 48% off sitewide.
Plus, get free fast shipping on $49+ U.S. orders. It's the perfect time to save on your next styling essential.
Shop Now
