How to Use Wavytalk Airshape Pro: Signature Airstyler Set Guide

Accessories included in the Airshape Pro set

The Airshape Pro Signature Air Styler Set includes four styling options for drying, curling, smoothing, and creating volume.

• Airshape Pro Airstyler Handle x1
• Auto-Wrap Barrels x2
• Oval Blowout Brush x1
• Smoothing Paddle Brush x1
• Fast-Drying Concentrator x1
• Storage Bag x1

Getting Started With the Wavytalk Airshape Pro

1. Towel-dry and detangle your hair before styling.
2. Make sure the tool is switched off before installing an attachment.
3. Align the arrows on the attachment and handle.
   
4. Press the attachment into place until it clicks securely.
5. Plug the Airshape Pro into a suitable wall outlet.
6. Select a comfortable airflow and heat setting for your hair type.
   
   

The Airshape Pro provides three airflow settings, three heat settings, and a Cool Shot control for setting the finished style.

For more controlled styling, divide your hair into manageable sections and secure the upper sections with clips.

How to Use the High-Speed Dryer

The High-Speed Dryer attachment prepares wet hair for the other styling attachments and can also be used for general drying.

1. Begin with towel-dried, detangled hair.
   
   
2. Attach the High-Speed Dryer while the tool is switched off.
3. Select your preferred heat and airflow settings.
   
4. Direct the airflow around the roots, mid-lengths, and ends.
5. Move the dryer continuously instead of holding it over one area. Otherwise, it could cause damage to your hair.
6. Dry your hair until it is approximately 80% dry before curling or smoothing.
   The Wavytalk AirShape Pro is better suited for styling hair when it is slightly damp.
   

Hair should still feel slightly damp before using the styling brushes or auto-wrapping curlers. This helps the hair take shape as it finishes drying.

How to Use the Auto-Wrapping Curlers

The Auto-Wrapping Curlers use directed airflow to draw the hair around the barrel. The set includes curlers for opposite wrapping directions, allowing you to style both sides of your hair.

1. Use the High-Speed Dryer until your hair is approximately 80% dry.
2. Divide your hair into sections and clip the hair above your ears out of the way.
   
3. Switch off the tool and attach the appropriate Auto-Wrapping Curler.
4. Take a small section of hair and hold the barrel near the ends.
   
   
5. Allow the airflow to automatically wrap the hair around the barrel.
6. Slowly move the barrel toward the roots while allowing the hair to wrap naturally.
   
   
7. Hold the wrapped section in place until it is dry and shaped.
   
8. Activate the Cool Shot and hold it for five seconds.
9. Turn the tool off before releasing the curl.
   
10. Repeat the process across the remaining sections.

For example, the style created for our models.

How to Use the Smoothing Paddle Brush

The Smoothing Paddle Brush is designed to dry and smooth the hair while creating a polished, straighter-looking finish.

1. Start with towel-dried hair.
2. Use a detangling comb through the mid-lengths and ends.
3. Pre-dry your hair with the High-Speed Dryer until it is approximately 80% dry.
4. Section the hair above your ears and secure it with clips.
5. Switch off the tool and attach the Smoothing Paddle Brush.
   
6. Place the brush close to the roots of a small section.
7. Glide the brush slowly from the roots to the ends.
   
   
   
8. Maintain gentle tension on the section as you move the brush downward.
   If you want the ends of your hair to have a slight curl, try applying a little pressure to guide the hair into a curve.
   
   
9. Repeat until each section is dry and smooth.

For additional smoothing, brush underneath the section while guiding the hair with your free hand. Avoid repeatedly passing over the same section once it is completely dry.

How to Use the Volumizing Oval Brush

The Volumizing Oval Brush helps create a soft blowout with lifted roots, smooth lengths, and rounded ends.

1. Start with towel-dried, detangled hair.
2. Comb through the mid-lengths and ends before styling.
3. Divide your hair into manageable sections and clip the upper layers away.
4. Switch off the tool and attach the Volumizing Oval Brush.
   
   
5. Place the brush underneath the hair near the roots.
6. Wrap the hair around the brush at the roots and glide downward.
   
   
7. Keep the hair under gentle tension as you move toward the ends.
8. At the ends, continue rotating the brush for a few seconds to create shape.
   
   
9. Hold the Cool Shot button for five to ten seconds to set the style.
   
10. Allow the section to cool before brushing or separating it.

For more root volume, lift the section upward while positioning the brush underneath the roots. To create curved ends, rotate the brush inward or outward as you finish each section.

Cleaning and Maintaining the Airshape Pro

Regular cleaning helps maintain consistent airflow and prevents loose hair or styling residue from building up around the attachments.

1. Switch off and unplug the tool.
2. Allow the tool and attachments to cool completely.
3. Slide the filter cage upward over the power cord.
   
   
4. Clean the filter cage with the included cleaning brush.
   
   
5. Gently clean dust and debris from the filter mesh.
   
   
6. Clip the filter cage securely back into place.
7. Use the cleaning rake to remove trapped hair from the Volumizing Oval Brush.
   
   

Remove loose hair from the Volumizing Oval Brush after every use. Never clean the handle or attachments while the tool is connected to power.

Frequently Asked Questions

Should I use the Airshape Pro on wet or dry hair?

It should be used on damp hair. Begin with towel-dried hair. For the curlers and smoothing brush, pre-dry the hair until it is approximately 80% dry before styling.

Why is my hair not wrapping around the curler?

It might be that there is too much hair to wrap around. Use a smaller section and hold the barrel close to the ends. Make sure the airflow is strong enough and allow the hair to wrap naturally before moving the barrel toward the roots.

How do I make the curls last longer?

Style your hair when it is about 80% dry. Ensure each strand wrapped around the curling iron dries completely; use the cool air setting for five seconds, then turn off the device before releasing the curl. Let the curled hair cool down before tousling it. You can use a setting spray if desired.

Can I change attachments while the Airshape Pro is running?

No. Switch off the tool before installing, removing, or changing an attachment.

How often should I clean the Airshape Pro?

Remove hair from the Volumizing Oval Brush after every use and inspect the filter regularly. Clean the filter whenever you notice visible dust or reduced airflow.